Wx data from ECHO ADSB to Ifly 720 ???

iFly GPS Forum

We have a new Forum!  Go here to get started: https://adventurepilot.community.forum.  
The new forum is easier to use and much more capable than the old, we hope you will join our community! 

Below is a copy of the old forum. This will remain available for a short period so you can access and review the information contained here. To continue a conversation, or start a new one, please register and create a post at our new forum location.
HomeHomeDiscussionsDiscussionsiFly General Di...iFly General Di...Wx data from  ECHO ADSB  to Ifly 720    ???Wx data from ECHO ADSB to Ifly 720 ???
Previous
 
Next
New Post
2/21/2018 6:36 PM
 

Flight today  at around 4pm  indicated  wx data  from ECHO  adsb was -412 minutes old! ( about 10 hours)  ie  the 720 was displaying wx data from  around 7AM this morning which look to be correct for that time of day .  It  appeared not to update during the 1 hour flight from (3Pm to 4PM) .   The  ECHO was receiving traffic and the 720 was displaying traffic  real time.  All appeared to be  OK with both the ECHO and 720.  Why was this  WX data so old?  every time I think about canceling my XM Wx  on the 396  something like this  shows up.  the Garmin 396  XM wx was right on the current wx  for the day.    I made a pic of the  "about, Connected device" and  reports appear in order .  My Question is : (1) is there some action i do to  update wx, ie pilot error,  (2) is the echo receiving wx reports , (3) is the  720  displaying the current  reports correctly?  or (4) was that  the most up to date  wx that ATC had or was transmitting?    I did reboot the 720  with no change in the  wx HISTORY .   I will try to attach the poor  quality pic of the connected device page and  another that shows what I was seeing on the  720.  Any ideas  on issue or knowledge on the  where the issue resides. no luck in uploading pic  send me text at 7708two three34two6 and I will send  you  three pic

 
New Post
2/21/2018 6:50 PM
 

Are you sure you were receiving a ground station?  Did you have a check mark next to Metar/TAF and Nexrad under the Map Layers Menu?  Did you try rebooting both the Echo and iFly?

 
New Post
2/21/2018 7:15 PM
 

Yes was recvn 2 and sometime 3 towers. Didn't look under the page with the check marks, good point.  Did  exit the application( nav)  and  restart  but didn't power down and reboot the 720.   Didn't rebot the echo for the reason traffic  repts were completely normal.  Send me a text and i will return the 3 pic i took

 
New Post
2/22/2018 2:19 PM
 

Dennis,

Post your pics on here of the connected device page.

-JJ

 
New Post
2/22/2018 2:59 PM
 

Dennis,

Start a reply.  Make sure "Rich Text Editor" is selected above the top of the text box.  Click on the "Image" icon in the 2nd line of icons, just right of center.  It looks like two small mountains with the sun rising above them.  When the "Image Properties" box appears, click on the "Upload" tab along the top.  Click "Choose your file", and select the file from your computer that you want to send.  Click "Send it to Server", click OK, and it'll upload to your message.  Attached is the "Image" icon.

 


Jeff Nokomis Clark, Mooney M20G, iFly app on ASUS ZenPad Z8s, ASUS ZenFone AR, ASUS Windows 10 tablet, Stratux ADS-B w AHRS
 
Previous
 
Next
HomeHomeDiscussionsDiscussionsiFly General Di...iFly General Di...Wx data from  ECHO ADSB  to Ifly 720    ???Wx data from ECHO ADSB to Ifly 720 ???