ADSB Traffic Target Documentation - iFly General Discussions

iFly GPS Forum

We have a new Forum!  Go here to get started: https://adventurepilot.community.forum.  
The new forum is easier to use and much more capable than the old, we hope you will join our community! 

Below is a copy of the old forum. This will remain available for a short period so you can access and review the information contained here. To continue a conversation, or start a new one, please register and create a post at our new forum location.
HomeHomeDiscussionsDiscussionsiFly General Di...iFly General Di...ADSB Traffic Target DocumentationADSB Traffic Target Documentation
Previous
 
Next
New Post
12/11/2019 8:38 AM
 
JeffGilbert
No Ranking

Joined: 7/12/2019
Posts: 4

The Pilots Guide (iFlyGPS Pilots Guide 10.3.pdf, page 44) could use some more detail on the traffic labels.

Do I have this right:

➤⎯⎯⎯
 -13↥

Means traffic is between 3 and 10nm horizontal distance, 1,300' below ownship, heading 090°, climbing, and will be at the location indicated by the far end of the line in 60 seconds.  

I'm using Stratux ADSB, IN only, so I assume my altitude is from GPS only?
 
New Post
12/11/2019 4:07 PM
 
Dennis
No Ranking


Dennis's Avatar

Joined: 9/6/2011
Posts: 86
That's the way I understand it. Assume you have found the "traffic " instrument and have found that you are able to set the distance you will have the " Traffic Box" appear on your screen . I have mine set at 3nm and have determined that once the Traffic Box appears, there is sufficient time to visually find him or determine by position that hes not an issue. Usually around 1.5 nm before the target will be visible.
 
 Page 1 of 1
Previous
 
Next
HomeHomeDiscussionsDiscussionsiFly General Di...iFly General Di...ADSB Traffic Target DocumentationADSB Traffic Target Documentation


Adventure Pilot LLC

1476 Industrial Blvd McKinney, TX 75069
info@iflyefb.com
M-F: 10:00am - 5:00pm CT
(214) 585-0444

© 2023 by Adventure Pilot : Terms Of Use : Privacy Statement