Two ADSB Devices - Configuration Question - ADS-B Discussions

iFly GPS Forum

We have a new Forum!  Go here to get started: https://adventurepilot.community.forum.  
The new forum is easier to use and much more capable than the old, we hope you will join our community! 

Below is a copy of the old forum. This will remain available for a short period so you can access and review the information contained here. To continue a conversation, or start a new one, please register and create a post at our new forum location.
HomeHomeDiscussionsDiscussionsADS-B Discussio...ADS-B Discussio...Two ADSB Devices - Configuration QuestionTwo ADSB Devices - Configuration Question
Previous
 
Next
New Post
11/21/2019 4:25 PM
 

I have two ADSB devices in my Long-Ez.  The first one is an iLevil AW3 (with AHRS and pitot/static inputs).  The second one is a uAvionix Echo In/Out transceiver.  My plan is to connect the iLevil to the 740b tablet (via WIFI) so I can utilize the synthetic vision option.  Then, connect the uAvionix Echo to an iPad running the IflyGPS app (via a separate WIFI connection) for the sectional chart

1) When connecting an iLevil AW3  (with AHRS), what device should I check from the menu of wireless devices  Menu>About>Connected Devices>Wireless Devices?  I see that there are two choices.

2) In the same menu heirarchy as questions #1, I do not see a choice for the uAvionix Echo.  Will that be forthcoming in the next software release?

Thanks,

Steve
 

 
New Post
11/21/2019 4:47 PM
 

Hopefully an iFly rep or someone with a uAvionix device will pipe up soon, but until then, here's the advice I'd give for any device not explicitly listed:  First, try Auto-detect.  If that doesn't work, try Stratux.

You could also try calling Adventure Pilot and talking to customer service:  (214) 585-0444.  

 
Previous
 
Next
HomeHomeDiscussionsDiscussionsADS-B Discussio...ADS-B Discussio...Two ADSB Devices - Configuration QuestionTwo ADSB Devices - Configuration Question