How to create a custom waypoint with GPS coordinates only? Or f

iFly GPS Forum

We have a new Forum!  Go here to get started: https://adventurepilot.community.forum.  
The new forum is easier to use and much more capable than the old, we hope you will join our community! 

Below is a copy of the old forum. This will remain available for a short period so you can access and review the information contained here. To continue a conversation, or start a new one, please register and create a post at our new forum location.
HomeHomeDiscussionsDiscussionsiFly Owners Q&AiFly Owners Q&AHow to create a  custom waypoint with GPS coordinates only? Or fly to coordinates on plan?How to create a custom waypoint with GPS coordinates only? Or fly to coordinates on plan?
Previous
 
Next
New Post
12/6/2017 6:20 AM
 

The other way to put that measuring line on the screen (as in the previous post by Jeff) is to touch the screen with two fingers at (almost) the same time, at the approximate endpoints of the line you want drawn.  The first finger to touch will be the anchor (red dot), and the second finger will be the target.  Hold for ~a half second or so for the line to appear.

As Jeff said, once the line is on the screen, you can grab the endpoints and move them around as required.

 
New Post
12/6/2017 6:47 AM
 

I guess I should have paid closer attention to which forum we are in. If you actually have an iFly device, then multi-touch does not work for you. I no longer have my 740, but if I recall correctly you press and hold a point on the screen until a drop-down menu appears. An option near the bottom of the list will allow you to draw the same line using single touch.


Jeff Nokomis Clark, Mooney M20G, iFly app on ASUS ZenPad Z8s, ASUS ZenFone AR, ASUS Windows 10 tablet, Stratux ADS-B w AHRS
 
New Post
12/6/2017 9:34 PM
 

"PSK/320/28" just seems so much easier.

 
Previous
 
Next
HomeHomeDiscussionsDiscussionsiFly Owners Q&AiFly Owners Q&AHow to create a  custom waypoint with GPS coordinates only? Or fly to coordinates on plan?How to create a custom waypoint with GPS coordinates only? Or fly to coordinates on plan?